Arcade machines
Page 1 of 1
Arcade machines
meodingu Mon Jan 10, 2011 7:13 pm
Arcade machines
An original Dance Dance Revolution machine.
A standard Dance Dance Revolution arcade machine consists of two parts, the cabinet and the dance platform. The cabinet has a wide bottom section, which houses large floor speakers and glowing neon lamps. Above this sits a narrower section that contains the monitor, and on top is a lighted marquee graphic, with two small speakers and flashing lights on either side. Below the monitor are two sets of buttons (one for each player), each consisting of two triangular selection buttons and a center rectangular button, used mainly to confirm a selection or start the game. The dance stage is a raised metal platform divided into two sides. Each side houses a set of four acrylic glass pads[1] arranged and pointing in the orthogonal directions (left, up, down and right), separated by metal squares. Each pad sits atop four pressure activated switches, one at each edge of each pad, and a software-controlled cold cathode lamp illuminating the translucent pad. A metal safety bar in the shape of an upside-down "U" is mounted to the dance stage behind each player. Some players make use of this safety bar to help maintain proper balance, and to relieve weight from the legs so that arrows can be pressed with greater speed and accuracy.
Some DDR cabinets are equipped with Sony PlayStation memory card slots, allowing the player to insert a compatible memory card before starting a game and save their high scores to the card. Additionally, the equivalent home versions of DDR allow players to create and save custom step patterns (edits) to their memory card — the player can then play those steps on the arcade machine if the same song exists on that machine. This feature is supported in 2ndMix through Extreme. It was expected that SuperNova would include memory card support. However, the division of Konami which handled the production of the memory card slots shut down, causing Konami to pull memory card support out at the last minute. SuperNova however, introduced Konami's internet based link system e-Amusement to the series, which can save stats and unlocks for individual players (but cannot store edits) using a globalized smart card inserted into a slot unit installed atop the sides of the cabinet on top of the speakers. This functionality however, could only be used in Japan. During the North American release of Dance Dance Revolution SuperNOVA 2, an e-amuse capable machine was made available at a Brunswick Zone Arcade in Naperville, Illinois. It, and one other machine located in the Konami offices of El Segundo, California, are currently the only e-amuse capable machines in the United States.
The Solo arcade cabinet is smaller and contains only one dance pad, modified to include six arrow panels instead of four (the additional panels are "upper-left" and "upper-right"). These pads generally don't come with a safety bar, but include the option for one to be installed at a later date. The Solo pad also lacks some of the metal plating that the standard pad has, which can make stepping difficult for players who are used to playing on standard machines. An upgrade was available for Solo machines called the "Deluxe pad", which was closer to the standard cabinet's pad. Additionally Solo machines only incorporate two sensors, located horizontally in the center of the arrow, instead of four sensors (one on each edge).
Medical Marijuana Dispensary
Chimney Liners
An original Dance Dance Revolution machine.
A standard Dance Dance Revolution arcade machine consists of two parts, the cabinet and the dance platform. The cabinet has a wide bottom section, which houses large floor speakers and glowing neon lamps. Above this sits a narrower section that contains the monitor, and on top is a lighted marquee graphic, with two small speakers and flashing lights on either side. Below the monitor are two sets of buttons (one for each player), each consisting of two triangular selection buttons and a center rectangular button, used mainly to confirm a selection or start the game. The dance stage is a raised metal platform divided into two sides. Each side houses a set of four acrylic glass pads[1] arranged and pointing in the orthogonal directions (left, up, down and right), separated by metal squares. Each pad sits atop four pressure activated switches, one at each edge of each pad, and a software-controlled cold cathode lamp illuminating the translucent pad. A metal safety bar in the shape of an upside-down "U" is mounted to the dance stage behind each player. Some players make use of this safety bar to help maintain proper balance, and to relieve weight from the legs so that arrows can be pressed with greater speed and accuracy.
Some DDR cabinets are equipped with Sony PlayStation memory card slots, allowing the player to insert a compatible memory card before starting a game and save their high scores to the card. Additionally, the equivalent home versions of DDR allow players to create and save custom step patterns (edits) to their memory card — the player can then play those steps on the arcade machine if the same song exists on that machine. This feature is supported in 2ndMix through Extreme. It was expected that SuperNova would include memory card support. However, the division of Konami which handled the production of the memory card slots shut down, causing Konami to pull memory card support out at the last minute. SuperNova however, introduced Konami's internet based link system e-Amusement to the series, which can save stats and unlocks for individual players (but cannot store edits) using a globalized smart card inserted into a slot unit installed atop the sides of the cabinet on top of the speakers. This functionality however, could only be used in Japan. During the North American release of Dance Dance Revolution SuperNOVA 2, an e-amuse capable machine was made available at a Brunswick Zone Arcade in Naperville, Illinois. It, and one other machine located in the Konami offices of El Segundo, California, are currently the only e-amuse capable machines in the United States.
The Solo arcade cabinet is smaller and contains only one dance pad, modified to include six arrow panels instead of four (the additional panels are "upper-left" and "upper-right"). These pads generally don't come with a safety bar, but include the option for one to be installed at a later date. The Solo pad also lacks some of the metal plating that the standard pad has, which can make stepping difficult for players who are used to playing on standard machines. An upgrade was available for Solo machines called the "Deluxe pad", which was closer to the standard cabinet's pad. Additionally Solo machines only incorporate two sensors, located horizontally in the center of the arrow, instead of four sensors (one on each edge).
Medical Marijuana Dispensary
Chimney Liners
meodingu- Member
- Number of posts : 307
Registration date : 2010-09-28
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum